Sheet Metal Workers Salary — UK & US Data (2025)

What This Job Involves

Fabricate, assemble, install, and repair sheet metal products and equipment, such as ducts, control boxes, drainpipes, and furnace casings. Work may involve any of the following: setting up and operating fabricating machines to cut, bend, and straighten sheet metal; shaping metal over anvils, blocks, or forms using hammer; operating soldering and welding equipment to join sheet metal parts; or inspecting, assembling, and smoothing seams and joints of burred surfaces. Includes sheet metal duct installers who install prefabricated sheet metal ducts used for heating, air conditioning, or other purposes.

Typical duties, per the US Department of Labor's O*NET occupational database (mapped to this role's closest US equivalent, Sheet Metal Workers):

• Maintain equipment, making repairs or modifications when necessary.
• Fabricate ducts for high efficiency heating, ventilating, and air conditioning (HVAC) systems to maximize efficiency of systems.
• Fasten seams or joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, or bonds to assemble components into products or to repair sheet metal items.
• Transport prefabricated parts to construction sites for assembly and installation.
• Install assemblies, such as flashing, pipes, tubes, heating and air conditioning ducts, furnace casings, rain gutters, or downspouts in supportive frameworks.
• Hire, train, or supervise new employees or apprentices.

Source: O*NET OnLine, 47-2211.00 (US Dept. of Labor, public domain). Task duties describe the US-classified equivalent role and may vary slightly from UK practice for the same job title.

UK Regional Breakdown

Regions without published data for this occupation are omitted (ONS suppresses small samples).

Salary in Context

Within skilled trades as a whole (36 occupations tracked on this site), sheet metal workers pays about 5% below the average median for the category, ranking 21 of 36 by median pay. That's useful context if you're weighing this role against a lateral move within the same broad field, rather than against occupations with a completely different pay structure.

Location makes a real difference here: East Midlands pays around 20% more than North West for this same occupation, based on the regional breakdown above. If you're able to work remotely or are open to relocating, that gap is often larger than a typical annual pay rise.

US Salary Overview

In the United States, the equivalent occupation (Sheet Metal Workers, SOC 47-2211) has a national median wage of $61,800 per year according to BLS Occupational Employment and Wage Statistics (May 2025). Around 120,000 people are employed in this occupation in the US. Figures are shown in local currency and are not converted.

US Top States by Median Salary

See the full US state-by-state breakdown for sheet metal workers →

Related Jobs

Work out what this salary means after tax with our take-home pay calculator.

What Affects Pay for Sheet Metal Workers, and How to Use This Data When Negotiating

The figures above describe the market, not any one employer's ceiling. A few things generally explain where an individual lands within that range:

• Location: Pay for the same job title can vary by tens of thousands depending on region or state — see the location breakdown on this page for this specific role.
• Experience level: The gap between the 10th and 90th percentile mostly reflects years of experience and seniority within the role, rather than employer generosity alone.
• Employer size and sector: Larger organisations and higher-paying sectors tend to sit above the median for a given role; smaller employers and some non-profit or public-sector employers often sit below it.
• Qualifications and certifications: Professional qualifications relevant to a role can shift where someone lands within the percentile range, particularly in regulated or technical occupations.
• How common the role is: Roles with fewer people employed nationally tend to show wider pay variation than high-volume occupations, simply because the underlying sample is smaller and less standardised.

If you're using this page to prepare for a pay conversation, a few practical steps:

• Bring the actual percentile figures from this page into the conversation — a specific, sourced number ("the median for this role is £X") carries more weight than a general sense that you're underpaid.
• If you have several years of experience or a scarce skill set, anchor to the 75th percentile rather than the median — the median describes the middle of the market, not where an experienced hire should expect to land.
• Use the regional or state figure, not the national one, if your employer benchmarks pay nationally but you're based in a higher-paying area — the location breakdown above is the more relevant number to quote.
• Treat total compensation, not just base salary, as the real comparison — pension contributions, bonus structure and benefits can close a gap that base pay alone doesn't show.
• Time the conversation around a review cycle or a clear recent win, and bring both arguments — the market-rate evidence on this page and your own contribution — together rather than either alone.

Frequently Asked Questions

What is the average salary for a sheet metal workers in the UK?

The UK median is £31,920 per year (gross, before tax), based on ONS ASHE 2025 (provisional) data. The mean is £33,749.

Does location affect sheet metal workers pay in the UK?

Yes — regional pay varies materially for this occupation. East Midlands has the highest median at £32,251, while North West has the lowest at £26,863, a gap of roughly 20%. See the regional breakdown above for every area with published ONS data.

How does the US salary compare?

The equivalent US occupation (Sheet Metal Workers) has a national median of $61,800 per year (BLS OES May 2025). Figures are in local currency and not converted.

Where This Data Comes From

The UK figures on this page come from the Office for National Statistics' Annual Survey of Hours and Earnings (ASHE), the UK government's official annual employer survey of pay — not a self-reported salary site, and not a jobs-board average of advertised (rather than actually paid) salaries. The US figures come from the Bureau of Labor Statistics' Occupational Employment and Wage Statistics (OES) programme, the US equivalent: a large-scale survey of employers rather than job seekers. Both are gross figures — before income tax, National Insurance, or US federal/state tax and FICA — for the reason that gross pay is what's actually comparable across employers and locations; take-home pay depends on each person's own tax situation.

UK occupations are classified under the Standard Occupational Classification (SOC) 2020, and US occupations under the equivalent US SOC system — the two classification systems don't map perfectly onto each other, so where this page shows a UK and a US occupation together, that pairing is our own editorial best match for the closest equivalent role, not an official government cross-reference. See About & methodology for the full data-sourcing notes that apply across every page on this site.

Data: ONS ASHE Table 14/15, 2025 provisional · BLS OES, May 2025 · Page built 2026-10-25